Stockinst & suppliers of ASTM A36 Steel Plates – JFE Steel Corporation (Japan), A572 STEEL PLATE – Stockist and Suppliers, Stockinst & suppliers of CSA G40.21 STEEL PLATE – JFE Steel Corporation (Japan), Stockist and Suppliers A709 GRADE HPS 50W & 70W PLATES – JFE Steel Corporation (Japan) , Stockist and Exporters of A588 & A606 STEEL PLATE – JFE Steel Corporation (Japan), Stockist and Suppliers of A656 STEEL PLATE – JFE Steel Corporation (Japan), Stockist and Suppliers of A573 STEEL PLATE – JFE Steel Corporation (Japan), Stockist and Suppliers A283 STEEL PLATE – JFE Steel Corporation (Japan)
Chemtech Alloys Pvt Ltd & is a global leader in the processing of high strength and High tensile Plates abrasion resistant steel.
We offer one stop shopping for high strength and abrasion resistant steel from full plates as a raw material. High Strength Low Alloy or (HSLA) steel plates, provide greater environmental corrosion resistance and are stronger than convention carbon steel. HSLA is also very ductile, highly formable and easy to weld. HSLA steels are not typically made to meet a certain chemical composition, instead they are known to meet specific mechanical properties. The HSLA specification is intended primarily for use in structural members, where savings in weight and added durability are critical.
We have a large stock of high yield steel plates for engineering applications. The high yield plates are S690QL and S690QL1 to EN 10025-6 with additional stocks with yields at S890QL, S960QL and S1100QL.
These plates are typically used by crane manufacturers, in jackup rigs for the oil and gas industry and in a variety of structures where high yield steel is required for additional strength and/or to save weight.
High Yield Steel Plates Ex-Stock – JFE Steel Corporation (Japan)
We have one of the largest stocks of high yield plates in India with a particular focus on thicker plates
ASTM A36 Steel Plates – Stockist and suppliers – JFE Steel Corporation (Japan)
A572 STEEL PLATE – Stockist and Suppliers – JFE Steel Corporation (Japan)
CSA G40.21 STEEL PLATE -Stockist & Suppliers – JFE Steel Corporation (Japan)
A709 GRADE HPS 50W & 70W PLATES – Stockist and Suppliers – JFE Steel Corporation (Japan)
A588 & A606 STEEL PLATE – Stockist and Suppliers – JFE Steel Corporation (Japan)
A656 STEEL PLATE – Stockist and Suppliers – JFE Steel Corporation (Japan)
A573 STEEL PLATE – Stockist and Suppliers -JFE Steel Corporation (Japan)
A283 STEEL PLATE – Stockist and Suppliers – JFE Steel Corporation (Japan)
JFE Steel Corporation (Japan) steel plates exporters
JFE Steel Corporation (Japan) steel Sheets exporters
High Tensile Strength Steel Plates | APPROVED OR AUTHORIZED PRODUCTS |
High Tensile Strength Steel Plates with High Weldability | MAXIMUM AVAILABLE SIZES |
High Tensile Strength Steel Plates for High Heat-input Welding | GUIDE FOR ORDER PLACING |
High Tensile Strength Steel Plates for Civil Engineering and Industrial Machinery | Boiler steel |
High Atmospheric Corrosion Resistant Steel Plates | Fine-grain structural steels, normalised rolled |
Steel Plates for Low Temperature Service | Fine-grain structural steels, thermomechanically rolled |
High Tensile Strength Steel Plates for Low Temperature Service | General Construction Steel |
Abrasion Resistant Steel Plates | General purpose structural steels |
Steel Plates for Frame of Building | High carbon steels |
TMCP Steel Plates | High strength steels for cold-forming, normalised |
High Performance 590 N/mm2 Steel Plates | High Yield Steel |
High Performance 780 N/mm2 Steel Plates | High yield strength cold forming steels |
Fire Resistant Steel Plates | Simple pressure vessels steel |
Low Yield Strength Steel Plates | Stamping and cold forming steels |
Sea Water Corrosion Resistant Steel Plates | Steel for Boilers and Pressure Vessels |
Corrosion Resistant Steel Plates | Steel for gas cylinders and gas vessels |
Pure Iron Plates for Magnetic Shielding | Steel for large diameter pipes |
Steel Plates for Mold | Steel For Ship Building |
Steel Plates for Hot-dip Zinc-coated Tower Structure | Steel for welded tubes |
Steel Plates for Rocket | Steel Resistant to Atmospherical corrossion |
Weldable normalized fine grained pressure vessel steels | Steel with Cr., Mo.,Cr-Mo. |
Structural steels with enhanced resistance to atmosphere corrosion |
We are Stocking Following Origin (Make) Plates
ASTM A36 Steel Plates – JFE Steel Corporation (Japan)
ASTM A36 steel plate is one of the most widely used carbon structural steels used in the industry. It can be riveted, bolted or welded in the construction of bridges and buildings, and for general structural purposes. ASTM A36 is known to be an equivalent to EN S275 steel plate.
A36 STEEL PLATE SIZES – JFE Steel Corporation (Japan)
3/16” – 28”
TYPICAL CHEMICAL PROPERTIES –
Carbon, Max % |
0.026 |
Manganese, Max % |
0 |
Phosphorus, Max % |
0.04 |
Sulphur, Max % |
0.05 |
Silicon, Max % |
0.4 |
Copper, Max % |
0.20 |
TYPICAL MECHANICAL PROPERTIES
Tensile Strength ksi |
58-80 |
Yield 2% Offset ksi |
36 |
Plates and Bars: D,E
Elongation in 8in (min) |
20% |
Elongation in 2in (min) | 23% |
Shapes:
Elongation in 8in (min) |
20% |
Elongation in 2in (min) |
21% |
A572 STEEL PLATE – JFE Steel Corporation (Japan)
ASTM A572 steel plate is used in a variety of structural applications including bridges, buildings, construction equipment, freight cars, machinery, truck parts and transmission towers.
A572 steel plate is produced in five grades: 42, 50, 55, 60 and 65.
Mechanical Properties A572 Gr 50:
Tensile: 65 ksi min
Yield: 50 ksi min
Elongation: 16% min in 8” 19% min in 2” (for plates wider than 24”)
Mechanical Properties A572 Gr 60:
Tensile: 75 ksi min
Yield: 60 ksi min
Elongation: 16% min in 8” 15% min in 2” (for plates wider than 24”)
Mechanical Properties A572 Gr 42:
Tensile: 60 ksi min
Yield: 42 ksi min
Elongation: 18% min in 8” 22% min in 2” (for plates wider than 24”)
CSA G40.21 STEEL PLATE – JFE Steel Corporation (Japan)
Chemtech has a distribution center in Hamilton, Ontario, and is proud to provide an exceptional quality of steel that meets the CSA, Canadian Standards Association, and offers certifications for structural steel such as products like CSA G40.21 steel plates in different grades such as: 44W, 50W and 50A.
Mechanical Properties 44W/300W:
Tensile: 65 to 85 ksi
Yield: 44 ksi min
Elongation: 20% min in 8” 23% min in 2”
CAT 1 (32°F): 15 ft/lbs
CAT 2 (0°F): 15 ft/lbs
CAT 3 (-20°F): 15 ft/lbs
CAT 4 (-50°F): 15 ft/lbs
ASTM A709 steel plate is primarily used in the manufacture of bridges.
Leeco Steel stocks A709 steel plate Grade 36, 50 and 50W. These grades are often specified with charpy tests referencing the specific zone, or climatic region, in which the bridge will be in use.
Bridge steels can also be ordered to the AASHTO M270 spec referenced as AASHTO M270 Grade 36, AASHTO M270 Grade 50, AASHTO M270 Grade 50W. AASHTO is the abbreviation for American Association of State Highway and Transportation Officials
Mechanical Properties 709 Gr 36:
Tensile: 58 to 80 ksi
Yield: 36 ksi min
Elongation: 18% min in 8” 21% min in 2”
Mechanical Properties 709 Gr 50:
Tensile: 65 min ksi
Yield: 50 ksi min
Elongation: 16% min in 8” 19% min in 2”
Mechanical Properties 709 Gr 50W:
Tensile: 65 min ksi
Yield: 50 ksi min
Elongation: 16% min in 8” 19% min in 2”
A709 GRADE HPS 50W & 70W – JFE Steel Corporation (Japan)
ASTM A709 grade HPS steel plate is primarily used in the manufacture of bridges. The grades HPS 50W and HPS 70W are higher performing grades for extreme climates, where temperature fluctuations are a factor.
Gangsteel Grade : |
A709 Grade HPS 70W |
Specification: |
Thickness 8mm-300mm, Width: 1500-4020mm, Length: 3000-27000mm |
Standard: |
ASTM A709: Standard Specification for Structural Steel for Bridges |
Approval By Third Party |
ABS, DNV, GL, CCS, LR , RINA, KR, TUV, CE |
Classification: |
Structural Steel for Bridges |
ASTM A588 steel plate is a corrosion-resistant steel high-strength low-alloy (HSLA) structural steel plate that is excellent for welding, riveting or bolting in construction applications, primarily welded bridges and buildings where savings in weight or added durability are important. When properly exposed to the atmosphere, A588 is suitable for many applications in the bare or unpainted condition.
A606 steel plate is desirable where savings in weight or added durability are important, with enhanced atmospheric corrosion resistance.
A606 is supplied in two types:
Type II contains 0.02% minimum copper based on cast or heat analysis (0.18% minimum copper for product check).
Type IV contains additional alloying elements and provides a level of corrosion resistance substantially better than that of carbon steels with or without copper addition. When properly exposed to the atmosphere, Type 4 steel can be used bare, or unpainted, for many applications.
Mechanical Properties A588:
Tensile: 70 ksi min (4” and under), 67 ksi min (4”- 5”) 63 ksi min (Over 5”-8”)
Yield: 50 ksi min (4” and under), 46 ksi min (4”- 5”) 42 ksi min (Over 5”-8”)
Elongation: 16% min in 8” 19% min in 2” (for plates wider than 24”)
Mechanical Properties A242:
Tensile: 70 ksi min (3/4 and under), 67 ksi min (3/4- 1.5) 63 ksi min (Over 1.5-4)
Yield: 50 ksi min (3/4 and under), 46 ksi min (3/4- 1.5) 42 ksi min (Over 1.5-4)
Elongation: 16% min in 8” 19% min in 2” (for plates wider than 24”)
Mechanical Properties A606:
Tensile: 70 ksi min
Yield: 50 ksi min
Elongation: 22% min in 2”
A656 STEEL PLATE – JFE Steel Corporation (Japan)
ASTM A656 plate steel is a series of HSLA steels offering improved weldability, formability and notch toughness in the as-rolled condition. A656 plate steel is used in construction equipment, crane booms, truck frames and general fabrication. It is suitable at ambient and low temperatures.
A high strength low alloy steel plate used in structural applications where lighter weight and improved formability is critical. Made to Grades 50, 60, 70 and 80— the grade designating the yield point. We stock in Grade 80 up to 3/4’ , Grade 70 over 3/4” to 1” and Grade 60 over 1” to 1-1/2”.
Mechanical Properties 656 Gr 80:
Tensile: 90 ksi min
Yield: 80 ksi min
Elongation: 12% in 8” 15% in 2”
Mechanical Properties 656 Gr 70:
Tensile: 80 ksi min
Yield: 70 ksi min
Elongation: 14% in 8” 17% in 2”
Mechanical Properties 656 Gr 60
Tensile: 90 ksi min
Yield: 60 ksi min
Elongation: 17% in 8” 20% in 2”
ASTM A573 steel plate is a structural quality steel plate that is used in the manufacture of storage tanks. A573 is fully killed, made to fine-grain practice and is used where atmospheric conditions require improved notch toughness.
Gangsteel Grade : |
A573 grade 70 |
Specification: |
Thickness 8mm-300mm, Width: 1500-4020mm, Length: 3000-27000mm |
Standard: |
ASTM standard specification for structural carbon steel plates of improved toughness |
Approval By Third Party |
ABS, DNV, GL, CCS, LR , RINA, KR, TUV, CE |
Classification: |
structural carbon steel plates of improved toughness |
A283 STEEL PLATE – JFE Steel Corporation (Japan)
ASTM A283 plate steel features low and intermediate tensile strength carbon steel plate of structural quality. It has four common variants, each represented as a separate material. The material properties section below shows ranges encompassing all variants.
This specification covers four grades of carbon steel plates of structural quality for general application. Steel samples shall be melt processed by either open-hearth, basic-oxygen, or electric furnace. Heat and product analysis shall be performed wherein steel materials shall conform to required chemical compositions of carbon, manganese, phosphorus, sulfur, silicon, and copper. Steel specimens shall also undergo tensile tests and shall conform to required values of tensile strength, yield point, and elongation.
Grade A | Grade B | Grade C | Grade D | |
Carbon, max | 0.14 | 0.17 | 0.24 | 0.27 |
Manganese, max | 0.90 | 0.90 | 0.90 | 0.90 |
Phosphorus, max | 0.035 | 0.035 | 0.035 | 0.035 |
Sulphur, max | 0.04 | 0.04 | 0.04 | 0.04 |
SiliconPlates 1 1/2 in and under, max
Plates over 1 1/2 in |
0.40 0.15-0.40 | 0.40 0.15-0.40 | 0.40 0.15-0.40 | 0.40 0.15-0.40 |
Copper min % when copper steel is specified | 0.20 | 0.20 | 0.20 | 0.20 |
ASTM A283 carbon steel is an alloy of iron, further classified as a carbon steel. This is steel specification covers four grades of low carbon steel plates of structural quality for general application. Grades A, B, C and D.
- ASTM A 283 Gr C consist of four grade of material (A,B,C, & D) of carbon steel plate of structural quality for general application.
- ASTM A 36 covers carbon steel plate, shape, and bar of structural quality for use in riveted, bolted or welded construction of bridges and building and for general structural purpose.
- From material scope, both ASTM A 36 and ASTM A 283 are the carbon steel of structural quality for general application.
Material Grades – Structural Steel
Specification | Grades |
---|---|
EN 10025 – JFE Steel Corporation (Japan) | S275JR/J0/J2, S355JR/J0/J2, S355K2, S355ML/NL, S460ML |
ASTM – JFE Steel Corporation (Japan) | A36 |
ASTM A572 -JFE Steel Corporation (Japan) | Grade 50 |
ASTM A709 – JFE Steel Corporation (Japan) | Grade 50 |
ASTM A633 – JFE Steel Corporation (Japan) | Grade C |
AS/NZS 3678 – JFE Steel Corporation (Japan) | Grade 300, Grade 350L0 |
Norsok M-120 MDS – JFE Steel Corporation (Japan) | Y02, Y04, Y05 |
Material Grades – Offshore Quality Structural Steel (including pre-production qualified steels)
Specification | Grades |
---|---|
EN 10225 – JFE Steel Corporation (Japan) | S355G3, S355G7, S355G8, S355G9, S355G10, S420G2, S460G2, S500G2, S500, S690 |
API 2W/2H -JFE Steel Corporation (Japan) | Grade 50, Grade 60 |
API 2Y -JFE Steel Corporation (Japan) | Grade 60 |
Norsok M-120 MDS -JFE Steel Corporation (Japan) | Y15, Y20, Y25, Y30, Y35, Y40, Y45, Y50, Y55 |
Arctic Steels (Low temperature Charpy V-Notch (LCVN) and higher strength steels) |
Material Grades – Shipbuilding Grade Steel
Specification | Grades |
---|---|
ABS – JFE Steel Corporation (Japan) | AH36, DH36, EH36, FH36, AH40, DH40, EH40, FH40, AQ51, DQ51, EQ51, AQ56, DQ56, EQ56, AQ63, DQ63, EQ63, AQ70, DQ70, EQ70, FQ70 |
DNV -JFE Steel Corporation (Japan) | NV D36, NV E36, NV F36, NVF40, NV D500, NV E500, NV F500, NVE 690, NVF 690 |
ABS A131 -JFE Steel Corporation (Japan) | Grade A |
Material Grades – Pressure Vessel Steel (including Hydrogen Induced Cracking resistant (HIC) steels for sour service applications)
Specification | Grades |
---|---|
ASME/ASTM SA/A516 -JFE Steel Corporation (Japan) | Grade 60/65/70 HIC |
ASME/ASTM SA/A537 -JFE Steel Corporation (Japan) | Class 1 |
ASME SA387 – JFE Steel Corporation (Japan) | Grade 11/22, Class 1, 2 |
ASTM A514 – JFE Steel Corporation (Japan) | Grade F |
ASTM A517 – JFE Steel Corporation (Japan) | Grade Q |
EN 10028 – JFE Steel Corporation (Japan) | P355NH, P355NL1, P355NL2, P460NH, P460NL1, P460NL2 |
DIN EN 10028 – JFE Steel Corporation (Japan) | 16Mo3, 13CrMo4-5, 10CrMo9-10 |
BS 1501 – JFE Steel Corporation (Japan) | 223/224/225 490B LT30 /LT50 |
ABS A131 – JFE Steel Corporation (Japan) | Grade A |
Material Grades – Stainless Steel
ASTM A240/B625 | UNS | EN DIN 10088-2 | Material No. (WNr) |
---|---|---|---|
304 | S30400 | X5CrNi18-10 | 1.4301 |
304L | S30403 | X2CrNi19-11 | 1.4306 |
304H | S30409 | X6CrNi18-11 | 1.4948 |
310 | S31000 | X15CrNiSi25-21 | 1.4841 |
310S | S31008 | X8CrNi25-21 | 1.4845 |
316 | S31600 | X5CrNiMo17-12-2 | 1.4401 |
316L | S31603 | X2CrNiMo17-2-2 | 1.4404 |
316Ti | S31635 | X6CrNiMoTi17-12-2 | 1.4571 |
321 | S32100 | X6CrNiTi18-10 | 1.4541 |
321H | S32109 | X8CrNiTi18-10 | 1.4878 |
347 | S34700 | X6CrNiNb18-10 | 1.4550 |
347H | S34709 | X8CrNiNb16-13 | 1.4961 |
6Mo | S31254 | X1CrNiMoCuN25-20-7 | 1.4529 |
904L | N08904 | X1NiCrMoCu25-20-5 | 1.4539 |
Material Grades Duplex and Super Duplex
ASTM A240 UNS | EN DIN 10028-7 | Material No. (WNr) |
---|---|---|
S31260 | X2CrNiMoN25-7-4 | 1.4410 |
S32900 | X3CrNiMoN27-5-2 | 1.4460 |
S31803 / S32205 | X2CrNiMoN22-5-3 | 1.4462 |
S32760 | X2CrNiMoCuWN25-7-4 | 1.4501 |
S32750 / S32550 | X2CrNiMoCuN25-6-3 | 1.4507 |
Material Grades – Chrome Moly
Material Specification | Grades |
---|---|
ASTM A387 — JFE Steel Corporation (Japan) | Grade 5, 9, 11, 22, 91 |
EN 10028-2 (Material No. (WNr) | 16Mo3 (1.5415) 13CrMo4-5 (1.7335) 10CrMo9-10 (1.7380) 11CrMo9-11 (1.7383) X10CrMoVnb9-1 (1.4903) X10CrWMoVnb9-2 (1.4901) |
Material Grades – Nickel Alloy
Alloy | DIN | UNS | ASTM | Material No. (WNr) |
---|---|---|---|---|
400 | N04400 | B127 | 2.4360 | |
600 | N06600 | B168 | 2.4816 | |
625 | N06625 | B443 | 2.4856 | |
800H/HT | N08811 | B409 | 1.4959 | |
825 | N08825 | B424 | 2.4858 | |
NiMo29Cr | N10675 | B333 | 2.4600 | |
NiCr21Mo14W | N06022 | B575 | 2.4602 | |
NiMo16Cr16Ti | N06455 | B575 | 2.4610 | |
NiMo16Cr15W | N10276 | B575 | 2.4819 | |
NiCr23Mo16Cu | N06200 | B575 | 2.4675 | |
NiCr30FeMo | N06030 | B582 | 2.4603 | |
NiCr33Mo8 | N06035 | B575 | 2.4643 | |
NiMo22Cr15 | N10362 | B575 | 2.4708 |
Specialty material, such as 9% nickel plate for LNG, also available.
Material Grades – Specialty Steels
- AR400, AR500, Armor Plate
- Caterpillar Approved Steels
- Proprietary and Modified Steels
Size Range and Properties
Size Range
Standard Stock Dimensions*:
Length: 12200 mm and 10000mm
With: 3050 mm and 2500 mm
Thickness: 5mm – 300 mm (thickness range might differ based on material grade)