High tensile steel plates – Voestalpine (Austria)

Stockinst & suppliers of ASTM A36 Steel Plates – Voestalpine (Austria), A572 STEEL PLATE – Stockist and SuppliersStockinst & suppliers of CSA G40.21 STEEL PLATE – Voestalpine (Austria)Stockist and Suppliers A709 GRADE HPS 50W & 70W PLATES – Voestalpine (Austria) , Stockist and Exporters of A588 & A606 STEEL PLATE –Voestalpine (Austria), Stockist and Suppliers of A656 STEEL PLATE –Voestalpine (Austria)Stockist and Suppliers of A573 STEEL PLATE –Voestalpine (Austria), Stockist and Suppliers A283 STEEL PLATE –  Voestalpine (Austria)

Chemtech Alloys Pvt Ltd  & is a global leader in the processing of high strength and High tensile Plates abrasion resistant steel.

We offer one stop shopping for high strength and abrasion resistant steel from full plates as a raw material. High Strength Low Alloy or (HSLA) steel plates, provide greater environmental corrosion resistance and are stronger than convention carbon steel. HSLA is also very ductile, highly formable and easy to weld. HSLA steels are not typically made to meet a certain chemical composition, instead they are known to meet specific mechanical properties. The HSLA specification is intended primarily for use in structural members, where savings in weight and added durability are critical.

We have a large stock of high yield steel plates for engineering applications. The high yield plates are S690QL and S690QL1 to EN 10025-6 with additional stocks with yields at S890QL, S960QL and S1100QL.

These plates are typically used by crane manufacturers, in jackup rigs for the oil and gas industry and in a variety of structures where high yield steel is required for additional strength and/or to save weight.

High Yield Steel Plates Ex-Stock

We have one of the largest stocks of high yield plates in India with a particular focus on thicker plates

 

We are Stocking  Following  Origin (Make)  Plates
ASTM A36 Steel Plates – Stockist and suppliers – Voestalpine (Austria)
 A572 STEEL PLATE – Stockist and Suppliers – Voestalpine (Austria)
CSA G40.21 STEEL PLATE -Stockist & Suppliers – Voestalpine (Austria)
A709 GRADE HPS 50W & 70W PLATES – Stockist and Suppliers – Voestalpine (Austria)
, A588 & A606 STEEL PLATE – Stockist and Suppliers – Voestalpine (Austria)
A656 STEEL PLATE – Stockist and Suppliers – Voestalpine (Austria)
 A573 STEEL PLATE – Stockist and Suppliers -Voestalpine (Austria)
A283 STEEL PLATE – Stockist and Suppliers  – Voestalpine (Austria)
Voestalpine (Austria) steel plates exporters
Voestalpine (Austria) steel Sheets exporters

ASTM A36 Steel Plates – Voestalpine (Austria)

ASTM A36 steel plate is one of the most widely used carbon structural steels used in the industry. It can be riveted, bolted or welded in the construction of bridges and buildings, and for general structural purposes. ASTM A36 is known to be an equivalent to EN S275 steel plate.

A36 STEEL PLATE SIZES – Voestalpine (Austria)

3/16” – 28”

TYPICAL CHEMICAL PROPERTIES

Carbon, Max %

0.026

Manganese, Max %

0

Phosphorus, Max %

0.04

Sulphur, Max %

0.05

Silicon, Max %

0.4

Copper, Max %

0.20

TYPICAL MECHANICAL PROPERTIES

Tensile Strength ksi

58-80

Yield 2% Offset ksi

36

Plates and Bars: D,E

Elongation in 8in (min)

20%

Elongation in 2in (min) 23%

Shapes:

Elongation in 8in (min)

20%

Elongation in 2in (min)

21%

A572 STEEL PLATE – Voestalpine (Austria)

ASTM A572 steel plate is used in a variety of structural applications including bridges, buildings, construction equipment, freight cars, machinery, truck parts and transmission towers.

A572 steel plate is produced in five grades: 42, 50, 55, 60 and 65.

Mechanical Properties A572 Gr 50:
Tensile: 65 ksi min
Yield: 50 ksi min
Elongation: 16% min in 8” 19% min in 2” (for plates wider than 24”)

Mechanical Properties A572 Gr 60:
Tensile: 75 ksi min
Yield: 60 ksi min
Elongation: 16% min in 8” 15% min in 2” (for plates wider than 24”)

Mechanical Properties A572 Gr 42:
Tensile: 60 ksi min
Yield: 42 ksi min
Elongation: 18% min in 8” 22% min in 2” (for plates wider than 24”)

 

CSA G40.21 STEEL PLATE – Voestalpine (Austria)

Chemtech has a distribution center in Hamilton, Ontario, and is proud to provide an exceptional quality of steel that meets the CSA, Canadian Standards Association, and offers certifications for structural steel such as products like CSA G40.21 steel plates in different grades such as: 44W, 50W and 50A.

Mechanical Properties 44W/300W:
Tensile: 65 to 85 ksi
Yield: 44 ksi min
Elongation: 20% min in 8” 23% min in 2”

CAT 1 (32°F): 15 ft/lbs
CAT 2 (0°F): 15 ft/lbs
CAT 3 (-20°F): 15 ft/lbs
CAT 4 (-50°F): 15 ft/lbs

A709 STEEL PLATE – Voestalpine (Austria)

ASTM A709 steel plate is primarily used in the manufacture of bridges.

Leeco Steel stocks A709 steel plate Grade 36, 50 and 50W. These grades are often specified with charpy tests referencing the specific zone, or climatic region, in which the bridge will be in use.

Bridge steels can also be ordered to the AASHTO M270 spec referenced as AASHTO M270 Grade 36, AASHTO M270 Grade 50, AASHTO M270 Grade 50W. AASHTO is the abbreviation for American Association of State Highway and Transportation Officials

Mechanical Properties 709 Gr 36:
Tensile: 58 to 80 ksi
Yield: 36 ksi min
Elongation: 18% min in 8” 21% min in 2”

Mechanical Properties 709 Gr 50:
Tensile: 65 min ksi
Yield: 50 ksi min
Elongation: 16% min in 8” 19% min in 2”

Mechanical Properties 709 Gr 50W:
Tensile: 65 min ksi
Yield: 50 ksi min
Elongation: 16% min in 8” 19% min in 2”

A709 GRADE HPS 50W & 70W – Voestalpine (Austria)

ASTM A709 grade HPS steel plate is primarily used in the manufacture of bridges. The grades HPS 50W and HPS 70W are higher performing grades for extreme climates, where temperature fluctuations are a factor.

Gangsteel Grade :

A709 Grade HPS 70W

Specification:

Thickness 8mm-300mm, Width: 1500-4020mm, Length: 3000-27000mm

Standard:

ASTM A709: Standard Specification for Structural Steel for Bridges

Approval By Third Party

ABS, DNV, GL, CCS, LR , RINA, KR, TUV, CE

Classification:

Structural Steel for Bridges

 

A588 & A606 STEEL PLATE – Voestalpine (Austria)

ASTM A588 steel plate is a corrosion-resistant steel high-strength low-alloy (HSLA) structural steel plate that is excellent for welding, riveting or bolting in construction applications, primarily welded bridges and buildings where savings in weight or added durability are important. When properly exposed to the atmosphere, A588 is suitable for many applications in the bare or unpainted condition.

A606 steel plate is desirable where savings in weight or added durability are important, with enhanced atmospheric corrosion resistance.

A606 is supplied in two types:

Type II contains 0.02% minimum copper based on cast or heat analysis (0.18% minimum copper for product check).

Type IV contains additional alloying elements and provides a level of corrosion resistance substantially better than that of carbon steels with or without copper addition. When properly exposed to the atmosphere, Type 4 steel can be used bare, or unpainted, for many applications.

Mechanical Properties A588:
Tensile: 70 ksi min (4” and under), 67 ksi min (4”- 5”) 63 ksi min (Over 5”-8”)
Yield: 50 ksi min (4” and under), 46 ksi min (4”- 5”) 42 ksi min (Over 5”-8”)
Elongation: 16% min in 8” 19% min in 2” (for plates wider than 24”)

Mechanical Properties A242:
Tensile: 70 ksi min (3/4 and under), 67 ksi min (3/4- 1.5) 63 ksi min (Over 1.5-4)
Yield: 50 ksi min (3/4 and under), 46 ksi min (3/4- 1.5) 42 ksi min (Over 1.5-4)
Elongation: 16% min in 8” 19% min in 2” (for plates wider than 24”)

Mechanical Properties A606:
Tensile: 70 ksi min
Yield: 50 ksi min
Elongation: 22% min in 2”

A656 STEEL PLATE – Voestalpine (Austria)

ASTM A656 plate steel is a series of HSLA steels offering improved weldability, formability and notch toughness in the as-rolled condition. A656 plate steel is used in construction equipment, crane booms, truck frames and general fabrication. It is suitable at ambient and low temperatures.

A high strength low alloy steel plate used in structural applications where lighter weight and improved formability is critical. Made to Grades 50, 60, 70 and 80— the grade designating the yield point. We stock in Grade 80 up to 3/4’ , Grade 70 over 3/4” to 1” and Grade 60 over 1” to 1-1/2”.

Mechanical Properties 656 Gr 80:
Tensile: 90 ksi min
Yield: 80 ksi min
Elongation: 12% in 8” 15% in 2”

Mechanical Properties 656 Gr 70:
Tensile: 80 ksi min
Yield: 70 ksi min
Elongation: 14% in 8” 17% in 2”

Mechanical Properties 656 Gr 60
Tensile: 90 ksi min
Yield: 60 ksi min
Elongation: 17% in 8” 20% in 2”

A573 STEEL PLATE – Voestalpine (Austria)

ASTM A573 steel plate is a structural quality steel plate that is used in the manufacture of storage tanks. A573 is fully killed, made to fine-grain practice and is used where atmospheric conditions require improved notch toughness.

Gangsteel Grade :

A573 grade 70

Specification:

Thickness 8mm-300mm, Width: 1500-4020mm, Length: 3000-27000mm

Standard:

ASTM   standard specification for structural carbon steel plates of improved toughness

Approval By Third Party

ABS, DNV, GL, CCS, LR , RINA, KR, TUV, CE

Classification:

structural carbon steel plates of improved toughness

A283 STEEL PLATE – Voestalpine (Austria)

ASTM A283 plate steel features low and intermediate tensile strength carbon steel plate of structural quality. It has four common variants, each represented as a separate material. The material properties section below shows ranges encompassing all variants.

This specification covers four grades of carbon steel plates of structural quality for general application. Steel samples shall be melt processed by either open-hearth, basic-oxygen, or electric furnace. Heat and product analysis shall be performed wherein steel materials shall conform to required chemical compositions of carbon, manganese, phosphorus, sulfur, silicon, and copper. Steel specimens shall also undergo tensile tests and shall conform to required values of tensile strength, yield point, and elongation.

ASTM A283 Chemical Properties
Grade A Grade B Grade C Grade D
Carbon, max 0.14 0.17 0.24 0.27
Manganese, max 0.90 0.90 0.90 0.90
Phosphorus, max 0.035 0.035 0.035 0.035
Sulphur, max 0.04 0.04 0.04 0.04
Silicon

Plates 1 1/2 in and under, max

Plates over 1 1/2 in

0.40 0.15-0.40 0.40 0.15-0.40 0.40 0.15-0.40 0.40 0.15-0.40
Copper min % when copper steel is specified 0.20 0.20 0.20 0.20

ASTM A283 carbon steel is an alloy of iron, further classified as a carbon steel. This is steel specification covers four grades of low carbon steel plates of structural quality for general application. Grades A, B, C and D.

Comparison between A36 and A283C
  • ASTM A 283 Gr C consist of four grade of material (A,B,C, & D) of carbon steel plate of structural quality for general application.
  • ASTM A 36 covers carbon steel plate, shape, and bar of structural quality for use in riveted, bolted or welded construction of bridges and building and for general structural purpose.
  • From material scope, both ASTM A 36 and ASTM A 283 are the carbon steel of structural quality for general application.

Material Grades – Structural Steel

Specification Grades
EN 10025 S275JR/J0/J2, S355JR/J0/J2, S355K2, S355ML/NL, S460ML
ASTM A36
ASTM A572 Grade 50
ASTM A709 Grade 50
ASTM A633 Grade C
AS/NZS 3678 Grade 300, Grade 350L0
Norsok M-120 MDS Y02, Y04, Y05

Material Grades – Offshore Quality Structural Steel (including pre-production qualified steels)

Specification Grades
EN 10225 S355G3, S355G7, S355G8, S355G9, S355G10, S420G2, S460G2, S500G2, S500, S690
API 2W/2H Grade 50, Grade 60
API 2Y Grade 60
Norsok M-120 MDS Y15, Y20, Y25, Y30, Y35, Y40, Y45, Y50, Y55
Arctic Steels (Low temperature Charpy V-Notch (LCVN) and higher strength steels)

Material Grades – Shipbuilding Grade Steel

Specification Grades
ABS AH36, DH36, EH36, FH36, AH40, DH40, EH40, FH40, AQ51, DQ51, EQ51, AQ56, DQ56, EQ56, AQ63, DQ63, EQ63, AQ70, DQ70, EQ70, FQ70
DNV NV D36, NV E36, NV F36, NVF40, NV D500, NV E500, NV F500, NVE 690, NVF 690
ABS A131 Grade A

Material Grades – Pressure Vessel Steel (including Hydrogen Induced Cracking resistant (HIC) steels for sour service applications)

Specification Grades
ASME/ASTM SA/A516 Grade 60/65/70 HIC
ASME/ASTM SA/A537 Class 1
ASME SA387 Grade 11/22, Class 1, 2
ASTM A514 Grade F
ASTM A517 Grade Q
EN 10028 P355NH, P355NL1, P355NL2, P460NH, P460NL1, P460NL2
DIN EN 10028 16Mo3, 13CrMo4-5, 10CrMo9-10
BS 1501 223/224/225 490B LT30 /LT50
ABS A131 Grade A

Material Grades – Stainless Steel

ASTM A240/B625 UNS EN DIN 10088-2 Material No. (WNr)
304 S30400 X5CrNi18-10 1.4301
304L S30403 X2CrNi19-11 1.4306
304H S30409 X6CrNi18-11 1.4948
310 S31000 X15CrNiSi25-21 1.4841
310S S31008 X8CrNi25-21 1.4845
316 S31600 X5CrNiMo17-12-2 1.4401
316L S31603 X2CrNiMo17-2-2 1.4404
316Ti S31635 X6CrNiMoTi17-12-2 1.4571
321 S32100 X6CrNiTi18-10 1.4541
321H S32109 X8CrNiTi18-10 1.4878
347 S34700 X6CrNiNb18-10 1.4550
347H S34709 X8CrNiNb16-13 1.4961
6Mo S31254 X1CrNiMoCuN25-20-7 1.4529
904L N08904 X1NiCrMoCu25-20-5 1.4539

Material Grades Duplex and Super Duplex

ASTM A240 UNS EN DIN 10028-7 Material No. (WNr)
S31260 X2CrNiMoN25-7-4 1.4410
S32900 X3CrNiMoN27-5-2 1.4460
S31803 / S32205 X2CrNiMoN22-5-3 1.4462
S32760 X2CrNiMoCuWN25-7-4 1.4501
S32750 / S32550 X2CrNiMoCuN25-6-3 1.4507

Material Grades – Chrome Moly

Material Specification Grades
ASTM A387 Grade 5, 9, 11, 22, 91
EN 10028-2 (Material No. (WNr) 16Mo3 (1.5415)
13CrMo4-5 (1.7335)
10CrMo9-10 (1.7380)
11CrMo9-11 (1.7383)
X10CrMoVnb9-1 (1.4903)
X10CrWMoVnb9-2 (1.4901)

Material Grades – Nickel Alloy

Alloy DIN UNS ASTM Material No. (WNr)
400 N04400 B127 2.4360
600 N06600 B168 2.4816
625 N06625 B443 2.4856
800H/HT N08811 B409 1.4959
825 N08825 B424 2.4858
NiMo29Cr N10675 B333 2.4600
NiCr21Mo14W N06022 B575 2.4602
NiMo16Cr16Ti N06455 B575 2.4610
NiMo16Cr15W N10276 B575 2.4819
NiCr23Mo16Cu N06200 B575 2.4675
NiCr30FeMo N06030 B582 2.4603
NiCr33Mo8 N06035 B575 2.4643
NiMo22Cr15 N10362 B575 2.4708

Specialty material, such as 9% nickel plate for LNG, also available.


Material Grades – Specialty Steels

  • AR400, AR500, Armor Plate
  • Caterpillar Approved Steels
  • Proprietary and Modified Steels

Size Range and Properties

Size Range

Standard Stock Dimensions*:
Length: 12200 mm and 10000mm
With: 3050 mm and 2500 mm
Thickness: 5mm – 300 mm (thickness range might differ based on material grade)